EMPLOYING AGENTS FOR ADDRESING SECURITY ISSUES IN A NOVEL AGENT PLATFORM

Ioan SOVA

Universitatea Tehnica “Gheorghe Asachi” Iasi
Bulevardul Dimitrie Mangeron nr. 53A, 700050, Iasi, România
isova@cs.tuiasi.ro

Abstract. The paper presents the security agents used by a newly developed agent platform. This agent platform named PASIBC (Agent Platform for Knowledge Based Information Systems) employs a range of agents in order to address specific security issues. In the paper are described the security agent, the monitoring agents and the cryptographic agent. In order to share the domain semantic these agents subscribe to a set of RDF ontologies.
Keywords: agent platform, security agents, RDF ontologies

Back to top

A DISTRIBUTED FRAMEWORK FOR RESOURCE MANAGEMNT IN MOBILE COMPUTING USING INTELLIGENT AGENTS

Mihai Horia ZAHARIA¹, Cristian BUTINCU², Dan GÂLEA³

Universitatea Tehnica „Gh. Asachi” Iasi
Bd-ul D. Mangeron nr. 53 A, 700050, Iasi, Romania
¹mike@cs.tuiasi.ro, ²cbutincu@yahoo.com, ³dgalea@cs.tuiasi.ro

Abstract: This paper present a framework for mobile computing resource management using intelligent agents. This is aimed at improving the performance of the mobile computing networks. A dynamic dedicated routing will be achieved using specialized intelligent agents. They will also achieve the searching and reserving of the resources (services, generic or computational information) present in the system at a certain time. In the proposed system, each agent will tend to become specialized according to the user requirements, especially regarding the information about the location of the required resources.
Keywords: distributed systems, dynamic resource management, mobile computing, intelligent agents

Back to top

ARCHITECTURAL CONCEPTS FOR A DISTRIBUTED SYSTEM DIDICATED TO VIDEO, SPACE AND TEMPORAL INFORMATION PROCESSING

Stefan-Gheorghe PENTIUC¹, Tudor-Ioan CERLINCA²

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹pentiuc@eed.usv.ro, ²tudor_c@eed.usv.ro

Abstract. The aim of the paper is to present the architecture of a system dedicated to process complex information stored in a video-surveillance system, in this kind of system priority is the video information analyzed from the point of the space and temporal relationships established between the various targets.
Keywords: video, space and temporal information, image processing, space relationship between objects, complex video database specifications

Back to top

 

INTEGRATED GENERALIZED SYSTEM FOR THE IDENTIFICATION AND TRACEABILITY OF PRODUCTS AND SUBSETS

Vasile GAITAN¹, Cornel TURCU², Valentin POPA³, Adrian GRAUR⁴

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹gaitan@eed.usv.ro, ²cturcu@eed.usv.ro,
³valentin@eed.usv.ro, ⁴adriang@eed.usv.ro

Abstract. An RFID tag is a small RFID device, that can be attached to or incorporated into a product and can be used to identify it. This identification label is capable of transmitting data via RF, of receiving and storing data. The present paper presents an RFID-based integrated system that has been developed to allow the identification and traceability of products and subsets in whatever activity field. Hence the possibility of users to define their own information format to be stored in the transponder. The potential beneficiaries of this system are companies that activate in fields that lend themselves admirably to RFID technologies.
Keywords: RFID, reader, PocketPC, database

Back to top

NEW RS232 AUTO BAUD SYSCON COMPATIBLE CORE

Marius-Cristian CERLINCA¹, Adrian GRAUR²

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹mariusc@eed.usv.ro, ²adriang@eed.usv.ro

Abstract. There are many ways to debug an FPGA SoC. One method could be the JTAG of the FPGA himself used as debug peripheral for the SoC inside. Previously we developed a SoC with an Ethernet core as debug peripheral. Our first real world application with this SoC was an FRID hub so we needed the Ethernet core for sending/receiving data to/from RFID readers. We needed to debug the new SoC without using the Ethernet, so we developed a new RS232 SysCon auto-baud core.
Keywords: FPGA, SoC, debug, Ethernet core, RS232 core, RFID

Back to top

SPECIFICATIONS FOR A SYSTEM
FOR THE PERSONALIZED THERAPY OF DYSLALIA

Stefan-Gheorghe PENTIUC¹, Ovidiu SCHIPOR², Felicia GÎZA³, Doina SCHIPOR⁴

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹pentiuc@eed.usv.ro, ²ovidiu@eed.usv.ro,
³felicia@eed.usv.ro, ⁴vmoina@yahoo.com

Abstract. An adaptive system for the personalized therapy of dyslalia affecting children between 4 and 7 years old is proposed. Dyslalia represents a disorder of the phono-articulatory apparatus consisting in altered pronunciation of one or several phonemes. Statistics show that 6% of the pre school aged children suffer from different forms of dyslalia. The system will comprise 3 main parts: a mobile device for therapy of the dyslalia, an expert system for personalized therapy module, a virtual model of the mouth cavity. This model will allow visual demonstration of correct positioning of the speech generating elements; the child will make use of a powerful 3D visual instrument that he can explore and interact with. Correlating the flexions of the speech generation elements with the actual sounds, the impact on the patient is considerably increased as he has the possibility of differentiating between the sounds perceived as being correct.
Keywords: personalized therapy of dyslalia, adaptive system, mobile device, System on Chip, embedded system, virtual model, expert system

Back to top

MOBILE DEVICE AND VIRTUAL MODEL FOR THE PERSONALIZED THERAPY SYSTEM OF DYSLALIA

Stefan-Gheorghe PENTIUC¹, Radu Daniel VATAVU²,
Marius CERLINCA³, Tudor Ioan CERLINCA⁴

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹pentiuc@eed.usv.ro, ²raduvro@eed.usv.ro,
³mariusc@eed.usv.ro, ⁴tudor_c@eed.usv.ro

Abstract. The dyslalia is a disorder of the phono-articulatory apparatus consisting in altered pronunciation of one or several phonemes. The aim of the paper is to describe two main modules of the system for the personalized therapy of dyslalia affecting children under 7 years old. These main parts are: a mobile device for computer aided therapy of the dyslalia (a SoC – System on Chip architecture that stores the therapy model) and a virtual model of the mouth cavity. The model will allow visual demonstration of correct positioning of the speech generating element. The child will make use of a powerful 3D visual instrument that he can explore and interact with. The paper describes the architecture and the main functions of the mobile device and the design problems that must be solved to built the virtual model of the mouth cavity.
Keywords: personalized therapy, dyslalia, mobile device, System on Chip, embedded system, virtual model

Back to top

RFID-BASED CONFIGURABLE SECURITY SYSTEM

Remus PRODAN¹, Cristina TURCU²

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹prodan@eed.usv.ro, ²cristina@eed.usv.ro

Abstract. An RFID tag is a small RFID device that can be attached to a person and can be used for identification. Via RF, the identification tag is capable of transmitting, receiving and storing data. The aim of this paper is to present an RFID-based configurable security system that has been developed to facilitate the access control in restricted and time- restricted areas. Hence the possibility of users to define their own information format to be stored in the transponder.
Keywords: RFID, reader, transponder, security, PocketPC, database

Back to top

INTEGRATION OF A MOBILE DEVICE APPLICATION INTO A RFID-BASED SECURITY SYSTEM

Tudor CERLINCA¹, Marius CERLINCA² , Cristina TURCU³

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹tudor_c@eed.usv.ro, ²mariusc@eed.usv.ro, ³cristina@eed.usv.ro

Abstract. The aim of this paper is to present a PDA application that was designed to enable mobile devices to be easily integrated into security systems based on RFID technologies. The main goal of the application was to make the PDA devices capable of reading and writing transponders attached to different products and also communicating with desktop computers in order to transfer database records in both directions. The overall quality of security systems based on RFID technologies is considerably improved by the read-write transponders which can be used anywhere and anytime and which ultimately bring about significant cost cuts and time-shortened operations.
Keywords: PDA, RFID, transponder

Back to top

DISTRIBUTED ADMINISTRATION SYSTEM FOR ACCESS CONTROL BASED ON RFID TECHNOLOGIES (SDGAT)

Alexandru LARIONESCU¹, Catalin SÎICU², Vasile GAITAN³

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹lari@eed.usv.ro, ²siicu@eed.usv.ro, ³gaitan@eed.usv.ro

Abstract. This paper refers to a distributed administration system for access control, based on RFID technologies (RFID tags). The system comprises independent stations controlling the access through different gates using RFID readers. This paper presents the station architecture and the communication components on the PC.
Keywords: access control, RFID reader, RFID tag, OPC, IEEE 1745

Back to top

METHODS OF IMAGE PROCESSING USING IN RECORDING THE AREAS SUBJECT TO ELONGATION DEFORMATION THROUGH

Remus Catalin PRODAN

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
prodan@eed.usv.ro

Abstract. The aim of the present work is to present a system to record and calculate the various parameters of elongation of thin iron plates, relying on a recording method that uses a network with rhombic elements. At the same time we present the method used in the analysis of the grid traced on the test-piece. The analysis of the test-piece is made dynamically and thus we get information regarding the maximum limit of deformation, respectively the local admissible deformations in a certain area. One of the advantages of this application is that it allows on-line processing of the deformation process.
Keywords: image processing, camera, grid, network, tresholding, gray levels, filters, cells, contour, edge detection, pattern, polygonal, segmentation

Back to top

THE GYROSCOPIC SYSTEM FOR BUILDING STABILIZATION TO THE SEISMIC PHENOMENON

George MAHALU

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
mahalu@eed.usv.ro

Abstract. The seismic phenomenon conducts to the catastrophic effect into the building structures area. For that are needs to put it the solution problem into the rigorous scientific mode. A gyroscopic system can conduct to same solution if that is correctly mounted (into the building infrastructure) and dynamical configured. This paper treats some problems in relation with features of the stabilization gyroscopic system from the mathematical modeling point view. Some simulation results will be obtained.
Keywords: seismic phenomenon, gyroscopic stabilization, angular velocity, Euler angles.

Back to top

CLASS DETERMINATION USING SBA TECHNIQUE

Mirela DANUBIANU

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
mdanub@eed.usv.ro

Abstract. The education domain offers many interesting and challenging applications for data mining. The aim of this paper is to propose an application on data mining to allow a good students targeting for one of two possible specialisations for the last years of study. We wish to select students who are most likely to do well when they graduate.We use the association rule mining because provide a more powerful solution to the target selection proble by discovering all rules in data and by providing a complete picture of the domain.
Keywords: association rules, classification

Back to top

TRANSMISSION DATA ROUTING FOR A HARDWARE DEVICES NETWORK WIRELESS CONNECTED USING RADIO MODEMS

Mihai Gavril ROBU¹ , Catalin Marian SÎICU²,
Vasile Gheorghita GAITAN³, Teodor Emil TOLESCU⁴

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹rmgro@yahoo.com,² siicu@eed.usv.ro,
³gaitan@eed.usv.ro, ⁴tolescu@hotmail.com

Abstract. In the areas where there is little or no communication infrastructure and where existing infrastructure is expensive or inconvenient to use, wireless transmission of data in a network of devices can be a solution. Each node can communicate directly over a short range to the nodes nearby. In order to transmit a message beyond the range of a single node, a node must rely on one or more intermediate nodes to relay the messages to its final destination. This process is known as multi-hop communication.
Therefore, an important requirement is that these nodes must cooperate to form a network amongst them, by executing a common network protocol.
This paper presents two protocols used for data routing in a wireless network of hardware devices. These hardware devices are called SACIC. The first protocol aims the low resources devices. The network is built and controlled by a central node. The second protocol considers all nodes physically moveable, which can be connected dynamically in an arbitrary manner. The resources required are higher because each node must retain knowledge about the network topology in internal tables.
Keywords: radio modem, 802.11 protocol, routing, wireless, OPC

Back to top

CUTTING DIAGRAMS CUT UP FOR PLANE SURFACE WITH RESTRICTIONS

Ioan MAXIM

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
maximioan@yahoo.com

Abstract. The paper present a algorithm to order the cuttings in the cut diagrams in the conditions and restrictions imposed by woods material. This order is essential in cutting operation and use the algorithm of topological sort.
Keywords: cutting diagrams, cover of plane surfaces with restrictions, cutting graph, equilibration components, accepted cut diagram

Back to top

PAPERLESS COLOR MULTICHANEL DIGITAL RECORDER IDMC04

Vasile-Cristian TIPA¹, Dragos PERIANU²,
Mihai Gabriel DANILA³, Vasile Gheorghita GAITAN⁴

^{1, 2, 3} S.C. GENPRO S.R.L.
⁴ Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹tpacri@yahoo.com, ²dragos.perianu@gmail.com,
³danilamg@yahoo.com, ⁴gaitan@eed.usv.ro

Abstract. This paper briefly describes the software architecture and a few aspects from the designing and development phase of IDMC04 paperless recorder. Recorders are industrial devices designated to monitor and record the evolution of industrial process parameters.
This paper emphasis the distributed nature of the project rather than other technical or commercial issues.
Keywords: paperless recorder, data logger, chart recorder

Back to top

MULTICHANNEL UNIVERSAL INDICATOR A TOOL FOR DISTRIBUTED SYSTEMS

Cornel VENTUNEAC¹, Ioan UNGUREAN², Valentin VLAD³

S.C. GENPRO S.R.L.
¹corventu@yahoo.com, ²ioanu32@yahoo.com, ³valivladus@yahoo.com

Abstract. The process control and automation involves different challenges and solutions. This device is one solution for control and monitoring industrial processes. This device is a multichannel universal indicator with two independent PID control – loops, two types of display (LCD and 7segments cells), 6 digital outputs (type relay), 6 universal anlalog inputs, 2 analog outputs. It can be integratet in SCADA systems produced by SC GenPro SRL, through specific software.
Keywords: OPC, SCADA, PID, LCD,SPI,CAN, process control

Back to top

VOCAL SIGNAL DIGITAL PROCESSING.
INSTRUMENT FOR ANALOG TO DIGITAL CONVERSION STUDY

Ovidiu-Andrei SCHIPOR¹, Felicia-Florentina GÎZA²

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
¹schipor@eed.usv.ro, ²felicia@eed.usv.ro

Abstract. The goal of this article is to present interactive didactic software for analog to digital conversion using PCM method. After a short introduction regarding vocal signal processing we present some method for analog to digital conversion.
The didactic software is an applet that can be direct accessed by any interested person.
Keywords: PCM method, vocal signals, signal representation

Back to top

MANAGEMENT INFORMATION SYSTEM FOR A VIRTUAL STORE USING RFID TECHNOLOGIES

Cristian BUZDUGA

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
cristian.buzduga@gmail.com

Abstract. The aim of the paper is to present an information management system of a virtual store accessed by several customers through Internet. The system incorporates RFID technologies. The main solution given in this paper consists in the use of an ActiveX in the web page in order to interact with the devices and with the JavaScript code of the web portal.
Keywords: information management system, RFID technology, Internet

Back to top

NETWORK ON CHIP ARCHITECTURE IMPLEMENTED ON A FPGA DEVICE

Cristian Andy TANASE

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
andy_t@eed.usv.ro

Abstract. The complexity of multiprocessor-based SoC platforms calls for a serious revisiting of several on-chip communications. Architecture described below is implemented on an Xilinx - Virtex-II with SRAM (XC2V1000-4FG456C) device. The IP used are MIPS, DSP, CANopen, I/O ports and memory with memory management unit. The network has a star architecture and IPs are located in the star’s corners. The switches link these IP components and make two direction communications possible. Network interface port is used to link IP components and network. Protocol communication use messages to communicate.
Keywords: Network on Chip, switch, network architecture, FPGA

Back to top

NEURAL NETWORKS APPLICATIONS – CHAOTIC TIME SERIES PREDICTION

Sorin VLAD

Universitatea “Stefan cel Mare” Suceava
Str. Universitatii nr.9, 720225, Suceava, România
sorinv@seap.usv.ro

Abstract. Neural networks are interconnected elementary units called neurons following a connectivity pattern. The artificial neuron is a mathematical model of the biological nervous cell, mimicking their activity. One of the very important application domains of the neural networks is the prediction, and particularly the prediction of chaotic time series. The paper presents the result obtained when predicted the Mackey – Glass time series.
Keywords: chaotic, neural networks, time series, prediction

Back to top

ARTIFICIAL NEURAL SYSTEM FOR THE FAULT DETECTION USED IN THE AERIAL POWER LINES PROTECTION

Paul-Robert HALIUC

doctorand Universitatea « Politehnica » Bucuresti
Facultatea de Automatica si Calculatoare
haly@eed.usv.ro

Abstract This paper presents a new approach to fault classification for high protective relaying and show its effectiveness simulation on parallel transmission lines. The scheme is based on the use of neural network architecture. We begin our exploration with classifying fault type like 1-phase-to-ground, 2-phase-to-ground and phase-to-phase. Encouraging results are shown and indicate that this can be uused for supporting a new generation of very high speed protective relying system
Keywords: Power System, Protection, Relay, Fault Classification, Artificial Neural Network

Back to top